Compromised Cerebello-Thalamic White Matter Integrity in Medication-Free Patients With Obsessive-Compulsive Disorder

Objective@#The cerebello-thalamic tract is the only efferent white matter (WM) bundle of the cerebellum that connects the cerebellum to the thalamus and has recently attracted much attention in obsessive-compulsive disorder (OCD) with its integral role in higher order cognitive functions commonly impaired in OCD patients. Previous neuroimaging studies have shown that the cerebello-thalamic circuit is functionally impaired in OCD patients. However, the WM integrity of the cerebello-thalamic tract in OCD, which may underly functional abnormalities of the cerebello-thalamic circuit, is not yet sufficiently understood. Therefore, the current study aimed to elucidate whether compromised cerebello-thalamic WM integrity is observed in medication-free OCD patients. @*Methods@#In this study, diffusion tensor imaging was acquired from 106 medication-free OCD patients and 105 matched healthy controls (HCs). Probabilistic tractography was then used to reconstruct the cerebello-thalamic tract with accurate anatomical features. Three diffusion indices (fractional anisotropy, FA; mean diffusivity, MD; radial diffusivity, RD) were measured from the reconstructed bilateral cerebello-thalamic tract and then compared between groups. @*Results@#We found that patients with OCD showed significantly increased MD and RD in the right cerebello-thalamic tract compared to HCs, and there was no difference in FA between groups. @*Conclusion@#Our findings may indicate the underlying structural abnormalities of the dysfunctional cerebello-thalamic circuit in OCD patients. Therefore, our findings are expected to provide novel insights into the pathophysiology of OCD on the cerebello-thalamic WM architecture, extending our knowledge from the existing functional neurobiological model of OCD.

Sleep Disorders in Bipolar Disorders: A Narrative Review on Circadian Rhythm Disturbances and Sleep Apnoea / 수면정신생리

Bipolar disorders are a group of mood disorders characterised by relapsing mood episodes throughout the course of illness. Patients with bipolar disorders commonly present with various sleep problems. Patients in a manic episode generally show decreased need of sleep and those in a depressed episode frequently complain about hypersomnia. Current literature even points to evidence that patients with bipolar disorder in euthymic state may still show signs of sleep disturbances when compared to the general population. Clinicians may also note intricate interactions between changes of circadian rhythm and evolution of mood episodes in patients with bipolar disorder. Also, commonly prescribed medications which plays a crucial role in treatment of bipolar disorders including mood stabilisers and antipsychotic medications often cause significant weight gain over time. Being a risk factor of sleep apnoea, weight gain can predispose the patient to develop sleep apnoea. In this narrative review, we summarised current evidence and literature regarding characteristics of circadian rhythm and comorbid sleep apnoea in patients with bipolar disorder. We also present literature regarding implications of circadian disturbance and comorbid sleep apnoea in managing patients with bipolar disorder.

Determining the Most Appropriate Assistive Walking Device Using the Inertial Measurement Unit-Based Gait Analysis System in Disabled Patients

Objective@#To evaluate the gait pattern of patients with gait disturbances without consideration of defilades due to assistive devices. This study focuses on gait analysis using the inertial measurement unit (IMU) system, which can also be used to determine the most appropriate assistive device for patients with gait disturbances. @*Methods@#Records of 18 disabled patients who visited the Department of Rehabilitation from May 2018 to June 2018 were selected. Patients’ gait patterns were analyzed using the IMU system with different assistive devices to determine the most appropriate device depending on the patient’s condition. Evaluation was performed using two or more devices, and the appropriate device was selected by comparing the 14 parameters of gait evaluation. The device showing measurements nearer or the nearest to the normative value was selected for rehabilitation. @*Results@#The result of the gait evaluation in all 18 patients was analyzed using the IMU system. According to the records, the patients were evaluated using various assistive devices without consideration of defilades. Moreover, this gait analysis was effective in determining the most appropriate device for each patient. Increased gait cycle time and swing phase and decreased stance phase were observed in devices requiring significant assistance. @*Conclusion@#The IMU-based gait analysis system is beneficial in evaluating gait in clinical fields. Specifically, it is useful in evaluating patients with gait disturbances who require assistive devices. Furthermore, it allows the establishment of an evidence-based decision for the most appropriate assistive walking devices for patients with gait disturbances.

Semi-Fixed Lip Bumper in Lesch-Nyhan Syndrome: An Interim Treatment Modality / 대한소아치과학회지

Lesch-Nyhan syndrome is a rare X-linked, recessively inherited disorder of purine metabolism, caused by complete absence of the enzyme hypoxanthine-guanine phosphoribosyl transferase. This syndrome is characterized by 3 major features: neurological dysfunction, hyperuricemia, and cognitive and behavioral disturbances (e.g., self-mutilation, which begins at 2 to 3 years of age). Uncontrollable self-mutilation begins with biting of the perioral tissues and extends into patterns such as finger biting and head hitting. This report describes the case of a 31-month-old boy who was diagnosed with Lesch-Nyhan syndrome with severe lip injuries caused by self-mutilative behaviors. The behaviors were blocked with a semi-fixed lip bumper for a short period. The device was applied to the patient on the day of the visit without the requirement for an oral impression. It was easy to manage oral hygiene and adjust the device because it was detachable by clinicians and guardians. Therefore, a semi-fixed lip bumper may be useful as an interim appliance to block self-mutilative behaviors in children with Lesch-Nyhan syndrome.

Effect of Saliva Decontamination on Bond Strength of 1-step Self-etching Adhesives to Dentin of Primary Posterior Teeth / 대한소아치과학회지

The purpose of this study was to evaluate effect of saliva decontamination procedures on microtensile bond strength (MTBS) of 1-step self-etching adhesives to dentin of primary posterior teeth.63 sound primary-posterior teeth were randomly divided into 3 groups according to different kinds of 1-step self-etching adhesives: Scotchbond™ Universal Adhesive (SBU), All-Bond Universal® (ABU), and Tetric® N Bond Universal (TBU). Each group was randomly categorized into 7 subgroups: (I) application of adhesive without saliva contamination (control); (II – IV) contamination by saliva before photopolymerization; (V – VII) contamination by saliva after photopolymerization; (II, V) decontamination by drying; (III, VI) decontamination by washing and drying; (IV, VII) decontamination by washing, drying, and reapplication of adhesive. All samples were cut into the blocks. At least 15 blocks were tested for each subgroup.For SBU and ABU, the MTBS values of subgroups (I, IV, VII) were significantly higher than those of subgroups (II, III, V, VI). For TBU, the MTBS values of subgroups (I, IV) was significantly higher than those of subgroup (II, III, V, VI).The MTBS of 3 adhesives was reduced by saliva contamination. The adhesive strength on dentin of primary posterior teeth was restored by reapplication of the adhesives after washing and drying.

Effect of tDCS on Aberrant Functional Network Connectivity in Refractory Hallucinatory Schizophrenia: A Pilot Study

We aim to investigate the effect of fronto-temporal transcranial direct current stimulation (tDCS) on the interactions among functional networks and its association with psychotic symptoms. In this pilot study, we will determine possible candidate functional networks and an adequate sample size for future research. Seven schizophrenia patients with treatment-refractory auditory hallucinations underwent tDCS twice daily for 5 days. Resting-state fMRI data and measures of the severity of psychotic symptoms were acquired at baseline and after completion of the tDCS sessions. At baseline, decreased functional network interaction was negatively correlated with increased hallucinatory behavior. After tDCS, the previously reduced functional network connectivity significantly increased. Our results showed that fronto-temporal tDCS could possibly remediate aberrant hallucination-related functional network interactions in patients with schizophrenia.

The Effect of Polydeoxyribonucleotide on Chronic Non-healing Wound of an Amputee: A Case Report

Polydeoxyribonucleotide (PDRN) is safe and effective in wound healing, cellular growth, synthesis of extracellular matrix protein, and inflammation reduction via activation of adenosine A2 receptors. We report a 28-year-old male patient treated with PDRN injections for chronic non-healing wound refractory to negative pressure wound therapy, skin graft, or growth factors. Three injections of PDRN were administered at the wound site into the anterior and medial sides of the left stump on the 1st, 4th, and 9th days of hospitalization. The PDRN ameliorated wound healing by enhancing cell growth, tissue repair, and angiogenesis. PDRN application represents a potential treatment for non-healing wounds obviating the need for additional therapies, and hospitalization, as well as improve patient’s activities of daily living.

A 4-Axis Technique for Three-Dimensional Printing of an Artificial Trachea

BACKGROUND: Several types of three-dimensional (3D)-printed tracheal scaffolds have been reported. Nonetheless, most of these studies concentrated only on application of the final product to an in vivo animal study and could not show the effects of various 3D printing methods, materials, or parameters for creation of an optimal 3D-printed tracheal scaffold. The purpose of this study was to characterize polycaprolactone (PCL) tracheal scaffolds 3D-printed by the 4-axis fused deposition modeling (FDM) method and determine the differences in the scaffold depending on the additive manufacturing method. METHODS: The standard 3D trachea model for FDM was applied to a 4-axis FDM scaffold and conventional FDM scaffold. The scaffold morphology, mechanical properties, porosity, and cytotoxicity were evaluated. Scaffolds were implanted into a 7 × 10-mm artificial tracheal defect in rabbits. Four and 8 weeks after the operation, the reconstructed sites were evaluated by bronchoscopic, radiological, and histological analyses. RESULTS: The 4-axis FDM provided greater dimensional accuracy and was significantly closer to CAD software-based designs with a predefined pore size and pore interconnectivity as compared to the conventional scaffold. The 4-axis tracheal scaffold showed superior mechanical properties. CONCLUSION: We suggest that the 4-axis FDM process is more suitable for the development of an accurate and mechanically superior trachea scaffold.

Development of Printable Natural Cartilage Matrix Bioink for 3D Printing of Irregular Tissue Shape

The extracellular matrix (ECM) is known to provide instructive cues for cell attachment, proliferation, differentiation, and ultimately tissue regeneration. The use of decellularized ECM scaffolds for regenerative-medicine approaches is rapidly expanding. In this study, cartilage acellular matrix (CAM)-based bioink was developed to fabricate functional biomolecule-containing scaffolds. The CAM provides an adequate cartilage tissue–favorable environment for chondrogenic differentiation of cells. Conventional manufacturing techniques such as salt leaching, solvent casting, gas forming, and freeze drying when applied to CAM-based scaffolds cannot precisely control the scaffold geometry for mimicking tissue shape. As an alternative to the scaffold fabrication methods, 3D printing was recently introduced in the field of tissue engineering. 3D printing may better control the internal microstructure and external appearance because of the computer-assisted construction process. Hence, applications of the 3D printing technology to tissue engineering are rapidly proliferating. Therefore, printable ECM-based bioink should be developed for 3D structure stratification. The aim of this study was to develop printable natural CAM bioink for 3D printing of a tissue of irregular shape. Silk fibroin was chosen to support the printing of the CAM powder because it can be physically cross-linked and its viscosity can be easily controlled. The newly developed CAM-silk bioink was evaluated regarding printability, cell viability, and tissue differentiation. Moreover, we successfully demonstrated 3D printing of a cartilage-shaped scaffold using only this CAM-silk bioink. Future studies should assess the efficacy of in vivo implantation of 3D-printed cartilage-shaped scaffolds.

Neurocognitive Dysfunction in Patients with Obsessive-Compulsive Disorder in Association of Duration of Untreated Illness : A Preliminary Study

OBJECTIVES: Obsessive-compulsive disorder (OCD) is a chronic and disabling psychiatric disorder. The duration of untreated illness (DUI) has been suggested as one of the predictors of clinical course and outcome in various psychiatric disorders. There is increasing evidence that cognitive dysfunction is associated with the prognosis of OCD. The aim of this study was to investigate the influence of DUI on the neurocognitive functions in patients with OCD. METHODS: Sixty-two patients with a DSM-IV diagnosis of OCD from the outpatient clinic were included in this study. We defined the short DUI if the DUI was 2-year or less and the long DUI if it was longer than 2-year. Neurocognitive functions were assessed by visuospatial memory function test and 4 subsets of K-WAIS such as vocabulary, arithmetic, block design and picture arrangement. Differences in neurocognitive functions as well as clinical variables between OCD patients with short DUI and those with long DUI were investigated. Correlation analyses were also performed to determine the correlation between DUI and neurocognitive functions. RESULTS: Compared with the short DUI group, the long DUI group performed worse in the block design test, which measures executive function. The long DUI group also had a higher level of compulsive symptom severity than the short DUI group. However, the DUI was not correlated with neurocognitive functions. CONCLUSIONS: Findings in this preliminary study suggest that the long DUI in patients with OCD is associated with more severe executive dysfunction. Studies with larger samples and longitudinal design are needed to further confirm the prognostic role of the DUI in OCD.

Association between Quality of Life and Symptom Severity in Obsessive-Compulsive Disorder Patients Using EQ-5D

OBJECTIVES: Obsessive-compulsive disorder (OCD) is a disabling psychiatric disorder, and more attention is recently paid on the quality of life (QoL) in OCD patients. The Euro-QoL-5D (EQ-5D) is a widely used self-report to calculate a single score which represents ‘health utilities’. The aim of this study was to assess the health-related QoL for patients with OCD using the EQ-5D and to examine the relationship between health-related QoL and symptom severity. METHODS: Seventy-three patients with a Diagnostic and Statistical Manual of Mental Disorders (DSM-5) diagnosis of OCD were recruited from the outpatient clinic in Seoul National University Hospital. Symptom severity was assessed using the Yale-Brown Obsessive-Compulsive Scale (YBOCS), and QoL was assessed with the EQ-5D-5L questionnaire. Using Korean valuation study, a single score of QoL was calculated. RESULTS: Most of the OCD patients were relatively young (< 45 years) with the mean YBOCS total score of 19.33. The mean EQ-5D score was 0.71 and significantly correlated with symptom severity (r = -0.483, p < 0.001). 25% of the EQ-5D score was predicted by the YBOCS total score (b = -0.011, p < 0.001) by regression analysis. CONCLUSIONS: OCD patients suffer from lower health-related QoL and QoL significantly decreased as symptom severity increased. The results of the EQ-5D would enable further studies on QoL comparison across medical disease and mental disorders.

Lymphedema Associated With Primary Amyloidosis: A Case Study

We reported on a 60-year-old man presenting lymphedema of both lower extremities and scrotum for 3 years with unknown cause. We took a computed tomography scan of the lower extremities as a follow-up. There were diffuse subcutaneous edema in both lower extremities and multiple enlarged lymph nodes along the para-aortic and bilateral inguinal areas. For further evaluation, biopsy of an enlarged inguinal lymph node was taken, yielding a diagnosis of primary amyloidosis. A treatment of chemotherapy for amyloidosis was recommended for him. To our knowledge, this is the first report of lymphedema presenting with primary amyloidosis in Asia. This case suggests that primary amyloidosis could be one of the differential diagnoses in patients with lymphedema in the lower extremities.

Three-Dimensional Bio-Printing Equipment Technologies for Tissue Engineering and Regenerative Medicine

Three-Dimensional (3D) printing technologies have been widely used in the medical sector for the production of medical assistance equipment and surgical guides, particularly 3D bio-printing that combines 3D printing technology with biocompatible materials and cells in field of tissue engineering and regenerative medicine. These additive manufacturing technologies can make patient-made production from medical image data. Thus, the application of 3D bio-printers with biocompatible materials has been increasing. Currently, 3D bio-printing technology is in the early stages of research and development but it has great potential in the fields of tissue and organ regeneration. The present paper discusses the history and types of 3D printers, the classification of 3D bio-printers, and the technology used to manufacture artificial tissues and organs.